Where should electrical panels be located?

Where should I place my electrical panel?

In summary, electrical panels can be located anywhere other than in bathrooms, clothes closets, above steps of a stairway or in fire-rated partitions or area separation walls as long as the proper working clearances are provided per NEC 110.26, and the enclosure type is suitable for the application (i.e. NEMA 3R if …

What is the code for electrical panels?

Breaker panel must be at least 4 feet off the ground, but no higher than 6 feet. The panel door must be able to open at least 90 degrees. Working space around the breaker panel must be at least 30 inches wide and 72 inches from the ground up.

Does an electrical panel have to be on an outside wall?

3 Answers. They are almost always on an exterior wall. In some areas they are on the outside of the exterior wall – outside your house. Most inspectors would tell you that a garage (interior or exterior wall) or in the basement exterior (right where the line comes in) are the two best locations.

THIS IS UNIQUE:  Where can I buy solar cells?

Where can electrical panels not be installed?

A panel cannot be located: 1) Where exposed to physical damage. 2) In the vicinity of easily ignitable material. Clothes closets are specifically noted as an area with easily ignitable material (hanging clothes).

What is the most common location for electrical panels in a house?

The main service panel is typically located in the basement, or (in a house without a basement) in a utility room. Some homes will also have a sub-panel, which is a smaller version of the main panel, to control electrical circuits in a garage, a workshop, or other outbuilding.

How much space do you need around an electrical panel?

The space around electrical equipment should always be clear to be on the safe side. There should be at least 3 feet of space in front of equipment with a 30 inch width as well as 612 feet of headroom space.

Can I build a closet around my electrical panel?

ANSWER: According to Section 240-24(d) of the National Electrical Code (NEC), which says “Overcurrent devices shall not be located in the vicinity of easily ignitable material, such as in clothes closets,” you are not permitted to do this.

Can an electrical panel be located in a bedroom?

NEC does allow for electrical panel installation inside a bedroom. Bedrooms meet the NEC workspace requirements for electric panel installation. You can find electric panels inside bedrooms in condos or small houses where space may otherwise be limited.

Can a breaker panel be in a corner?

This means you cannot place an electrical panel close to a corner if another wall, fixture or piece of furniture is within 30 inches of it.

THIS IS UNIQUE:  What is the shape of an electric field?