The Occupational Safety and Health Administration (OSHA) and the National Electrical Code (NEC), require that electrical panels have a minimum of 3 feet (36 inches) of clearance and a minimum headroom of 6.5 feet or the height of the equipment whichever is greater.
How much space do you need around an electrical panel?
The space around electrical equipment should always be clear to be on the safe side. There should be at least 3 feet of space in front of equipment with a 30 inch width as well as 612 feet of headroom space.
How much clear space is the minimum distance near an electrical panel?
To be on the safe side, the working space and space around electrical equipment should always be clear per 110.26(A), if possible. As a basic rule, there should be at least 3 feet of space in front of all equipment with a 30 inch width as well as 6½ feet of headroom space.
Can you put something in front of electrical panel?
Just don’t put anything heavy or unwieldy in front of the panel, Mr. Wismer added. Or “you’ll have to get those Magic Sliders they show on TV for sliding the furniture around.”
How much clearance do you need for a breaker box?
The height of the working space must be at 6-1/2 feet. Other electrical equipment located above or below the panel cannot protrude more than 6-inches beyond the front of the panel.
What is the minimum width of the working space required at an electrical panel that is 24 wide?
wide that contains over current devices, switching devices, or control devices, there shall be one entrance to an egress from the required working space not less than 610mm (24 in.) wide and 2.0m (6½ ft.) high at each end of the working space.
Does an electrical panel have to be on an outside wall?
3 Answers. They are almost always on an exterior wall. In some areas they are on the outside of the exterior wall – outside your house. Most inspectors would tell you that a garage (interior or exterior wall) or in the basement exterior (right where the line comes in) are the two best locations.
Is it safe to work near an electrical panel?
Is it safe to sit near an electrical panel? Yes, as long as you’re an arm’s length away. Most electrical panels (as long as they’re working correctly) give off a small amount of EMF. … If you’re concerned about EMF, set up your living area as far from the electrical panel as you can.
Can I cover my electrical panel with a picture?
For a quick fix, try hanging a painting or covered frame over it. A circuit breaker can also be hidden inside a cabinet as long as you keep it accessible. If you like painting, try using spray paint to blend the box in with the rest of the room.
Can an electrical panel be over a countertop?
You cannot put it over anything. You cannot put it next to anything. There must a clear space in front of the panel for an electrician to stand. … In your case, locating the panel under a counter would require an electrician to work on his or her knees when working in the panel.
What is code for electrical panel?
The National Electrical Code 110.26 states that breaker boxes, and electrical equipment in general, must be placed in areas that provide sufficient working clearance around them. More specifically, the breaker box needs 3 feet of clearance in front of it.