Although electric fireplaces produce enough heat to warm a room 400 square feet and up, they remain cool to the touch. Without the issue of hot metal casings, electric fireplaces are a safe alternative to a traditional fireplace for kids and pets.
How many square feet does an electric fireplace heat?
Generally, an electric fireplace will heat up to 400 square feet. Of course there are few models that will do more and a few that will do less, but 400 square feet is a safe overall bet. Even the electric stoves will cover up to 400 square feet. Most give off about 5,000 BTU’s of heat.
How much space does an electric fireplace take?
Most electric fireplaces operate on a standard household outlet (120 volts) and provide between 4,500 and 5,000 BTU, roughly the same output as a small electric space heater. This means an electric fireplace like this Dimplex BLF can comfortably heat an area approximately 450 square feet in size.
Do electric fireplaces really heat up a room?
Electric fireplaces can also heat a room faster and more efficiently than wood-burning fireplaces, and they’re safe to use. These cost-effective heaters are also one of the most efficient ways to heat a room, which reduces energy costs. To find the best electric fireplace for your home, find a dealer near you.
How big of a space can a fireplace heat?
Many fireplaces, stoves and inserts are capable of heating 2000-3000 square feet of well insulated space. These are normally rated by BTU/output and by the cubic foot size of the firebox. The larger the firebox, the more wood it will hold. The longer the wood will last, the more heat is produced.
Can electric fireplace heat 1000 square feet?
Infrared Heaters and Infrared Fireplaces are the perfect solution for providing powerful supplemental heat for larger rooms – up to 1,000 sq. ft. The quartz infrared heating technology creates a soft, moist heat while maintaining a cool-to-the-touch surface, making it safe for use around both children and pets.
How much will an electric fireplace raise my electric bill?
Following the energy efficient electric fireplace study, the below reveals the running costs for electric fireplaces. Electric fireplaces cost $0.22 per hour, $7.58 per week and $32.50 per month to run, on average, in the US. As a result, on average electric fireplaces increase monthly US electricity bills by 28.3%.
Are electric fireplaces safer than space heaters?
Yes. Electric fireplaces are considered safer than space heaters because they produce a flame effect without creating actual, real fire. There is limited exposure or a smaller probability of danger around furniture, table cloths, drapes as a result due to no chance of embers escaping from the fireplace.
How much space do you need between TV and electric fireplace?
Recommended Space Between the TV and Electric Fireplace
In general, for most fireplace models, we advise 8 inches from the top of the fireplace to the mantel, TV or ceiling and 6 inches from the bottom of the fireplace to the floor.
Does electric fireplace add value to home?
While an electric fireplace may not increase the value of a property in the same way a gas fireplace can, a budget-conscious consumer can create a beautiful setting with a premium electric fireplace unit. This, in turn, can create a more desirable living space.
Does an electric fireplace need a vent?
Q – Do Electric Fireplaces need venting? A – No, Electric fireplaces do not create any emissions and therefore do not need to be vented through a chimney, direct vent, or other source like gas and wood fireplaces do.
Is it safe to put an electric fireplace under a TV?
Can You Put An Electric Fireplace Under A TV? An electric fireplace can be installed under a TV but it must be ensured that the TV doesn’t block the heater on the fireplace. … Different models of electric fireplace will have the heater located in different positions.
How do you size a fireplace for a room?
To calculate fireplace size, measure the width, length, and height of your room in inches. Multiply these three numbers together to determine the room’s volume, then multiply that number by four, which will give you a close minimum heat output. You can select an appropriate size with the original dimensions.
Why does my fireplace not heat the room?
As the cooler air is sucked into the chimney, the heavier heated air rises to the top and is vented through the chimney along with smoke, soot and other contaminants. This continuous down draft flow of cold air is causing your home to be insufficiently heated.